question

Baumesser Keramik Pro M14

Description:

DDR M14 Keramik Pro
This is a PRO speed!
Every year the range of hard, frost-resistant porcelain tiles is expanding, the processing of which is becoming more and more complicated. For cutting and drilling such materials, you need a high-speed tool.
Vacuum drill bits Baumesser Keramik Pro are high-speed drill bits for all types of ceramics and porcelain tiles. High-strength diamond, fixed in a solid bond, forms developed cutting micro-cutters that effectively penetrate the ceramic material.

The average drilling speed of 10 mm porcelain tiles on an angle grinder is 7 seconds (5-15 seconds depending on the hardness of the material). The resource is 20-70 holes. It is recommended to set the speed of angle grinder in the range of 8,000-11,000 rpm. 
Drilling should be performed in dry mode with swaying movements, avoiding pressure on the drill bit.
It is produced in the diameter range of 6-70 mm. It is used on angle grinder 125 and 115 mm.


Specifications
Vc. Size ∅
Article
910 2830 18041
Size ∅
DDR-V 06x30xM14 Keramik Pro
Article
910 2830 18043
Size ∅
DDR-V 08x30xM14 Keramik Pro
Article
910 2830 18045
Size ∅
DDR-V 10x30xM14 Keramik Pro
Article
910 2830 18047
Size ∅
DDR-V 12x30xM14 Keramik Pro
Article
910 2830 18049
Size ∅
DDR-V 14x30xM14 Keramik Pro
Article
910 2830 18052
Size ∅
DDR-V 16x30xM14 Keramik Pro
Article
910 2830 18055
Size ∅
DDR-V 18x30xM14 Keramik Pro
Article
910 2830 18057
Size ∅
DDR-V 20x30xM14 Keramik Pro
Article
910 2830 18059
Size ∅
DDR-V 25x30xM14 Keramik Pro
Article
910 2830 18063
Size ∅
DDR-V 30x30xM14 Keramik Pro
Article
910 2830 18066
Size ∅
DDR-V 35x30xM14 Keramik Pro
Article
910 2830 18104
Size ∅
DDR-V 40x30xM14 Keramik Pro
Article
910 2830 18173
Size ∅
DDR-V 45x30xM14 Keramik Pro
Article
910 2830 18174
Size ∅
DDR-V 50x30xM14 Keramik Pro
Article
910 2830 18185
Size ∅
DDR-V 70x30xM14 Keramik Pro
Video:
Baumesser Keramik Pro M14