question

Baumesser Keramik Pro S10

Description:

DDR S10 Keramik Pro
This is a PRO speed!
Every year the range of hard, frost-resistant porcelain tiles is expanding, the processing of which is becoming more and more complicated. For cutting and drilling such materials, you need a high-speed tool.
Vacuum drill bits Keramik Baumesser Pro are high-speed drill bits for all types of ceramics and porcelain tiles. High-strength diamond, fixed in a solid bond, forms developed cutting micro-cutters that effectively penetrate the ceramic material.
The drill bits with a shank S10 used on drills, hammer drills in drill mode, and screwdrivers.
The average drilling speed of 10 mm porcelain tile by a 35 mm drill bit is 20 seconds (10-40 seconds depending on the hardness of the material and drilling modes). The resource is 30-100 holes. 
For best results, it is recommended to set the maximum speed.

Specifications
Vc. Size ∅
Article
910 2780 19041
Size ∅
DDR-V 06x30xS10 Keramik Pro
Article
910 2780 18043
Size ∅
DDR-V 08x30xS10 Keramik Pro
Article
910 2780 18045
Size ∅
DDR-V 10x30xS10 Keramik Pro
Article
910 2780 18047
Size ∅
DDR-V 12x30xS10 Keramik Pro
Article
910 2780 18049
Size ∅
DDR-V 14x30xS10 Keramik Pro
Article
910 2780 18052
Size ∅
DDR-V 16x30xS10 Keramik Pro
Article
910 2780 18055
Size ∅
DDR-V 18x30xS10 Keramik Pro
Article
910 2780 18057
Size ∅
DDR-V 20x30xS10 Keramik Pro
Article
910 2780 18059
Size ∅
DDR-V 25x30xS10 Keramik Pro
Article
910 2780 18063
Size ∅
DDR-V 30x30xS10 Keramik Pro
Article
910 2780 18066
Size ∅
DDR-V 35x30xS10 Keramik Pro
Article
910 2780 18104
Size ∅
DDR-V 40x30xS10 Keramik Pro
Article
910 2780 18173
Size ∅
DDR-V 45x30xS10 Keramik Pro
Article
910 2780 18174
Size ∅
DDR-V 50x30xS10 Keramik Pro
Article
910 2780 18185
Size ∅
DDR-V 70x30xS10 Keramik Pro
Video:
Baumesser Keramik Pro S10